6. Press the
button until Auto Scan is
highlighted.
7. Press the
button to start the search.
When finished, "Auto Scan Completed"
will be displayed at the top of the screen.
Note: This will take a few minutes to
complete.
3.2.3 Adding or Deleting (Skipping) TV Channels
To select a TV channel to be skipped when 'channel surfing' with the CH + / - buttons, or to be added to
these feature, follow this procedure.
1. Using the TV button on the remote, select
TV.
2. Select the channel directly by using the
Number Buttons on the remote and then
press the OK button.
3. Follow steps 1 ~ 3 in the previous section
3.2.2 to select the TV Setup menu.
4. Once selected, press the
highlight Set Channel. Press the OK
button and then press the
to Add or Delete the channel.
5. Press the
button when finished.
3.3 Using DTV with an Antenna or Cable
3.3.1 First Time DTV Use
If an antenna or cable source is connected to the
DTV/TV input, you will need to select DTV using the
INPUT button on the remote control or the side of the
LCD HDTV, or directly by pressing the TV button on the
remote control. The first time you use your DTV input
you will see the information panel, "Channel Scan
Required Press Menu".
Version 7/6/2006
button to
or
button
33
www.VIZIOCE.com
VIZIO GV46L HDTV User Manual