Adding New Channels - Vizio M43-C1 User Manual

SETTING UP CHANNELS
You can use the TV's Channels menu to:
•
VIZIO
•
CHANNELS
(Find Channels)
Channel Source
•
Find Channel
• Manually Add Channels
Partial Channel Search
Add Analog Channel
•
Skip Channel
•
Analog Audio
•
Digital Language
Selecting a Channel Source
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1. From the menu, highlight Channel Source and
press OK. The
Highlight Antenna or Cable and press OK. Press EXIT.
Cable
Scanning for Channels
The TV may need to scan for channels before it can display programs
and their associated information. A channel scan is required for
Stereo
free over-the-air channels (using an antenna) and cable channels
English
channels again.
1. From the menu,
highlight Find Channels, and
press OK. The auto channel scan
begins.
Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.

Adding New Channels

Occasionally, you may need to add a new range of channels or
add a new analog channel. You can do this by using the Partial
than scanning all possible channels.
menu displays.
To add a range of new channels:
1. From the
and press OK. The
displayed.
Highlight Scan Mode and select the type of channel you are
adding: Analog, Digital, or Analog/Digital.
3. Highlight From Channel and enter the channel where you
want to begin the scan. (Use the Left Arrow button to
backspace. Use the Number Pad on the remote to enter the
channel.)
VIZIO
4. Highlight To Channel and enter the channel where you want
to end the scan. (Use the Left Arrow button to backspace. Use
FIND CHANNELS
the Number Pad on the remote to enter the channel.)
Channels Found
Digital: 0
5. Highlight Start and press OK. The partial channel search
Analog: 19
begins.
18% Complete
Cancel 6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
7. Press the EXIT button on the remote.
Cancel the channel scan.
4
menu, highlight Partial Channel Search,
menu is
36