Connecting An External Receiver/Amp - Vizio GV46LHDTV10A User Manual

2.6 Connecting an external Receiver/Amp

1. Turn off the power to the LCD HDTV and Receiver/Amp.
2. Using an audio cable (white and red connectors), connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white
area) audio connectors at the rear of the LCD HDTV.
3. Turn on the power to the LCD HDTV
and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5. Press the
highlight the Audio Settings menu.
6. Press the
select the Audio Settings menu.
7. Press the
highlight Speakers and then press the
OK button.
8. Press the
select OFF so that the sound will now
be routed through your Receiver/Amp
system. Press EXIT on the remote to close the OSD.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (gray area) at the rear of the LCD HDTV. This is active when receiving digital audio with the
programs from the DTV/TV CABLE/ANTENNA input.
Version 7/6/2006
button on the remote to
button on the remote to
button on the remote to
button on the remote to
www.VIZIOCE.com
VIZIO GV46L HDTV User Manual
29