ViewSonic N4290p User Manual page 31

Using the TV Features
Storing Channels into Memory
1. Press the MENU button to display the OSD
main menu.
2. Press or to select the "Setup" menu.
Press or to select "Tuning Band, and use
to select the antenna connection to "Air" or
"Cable".
Air: "Air" antenna signal programs
Cable: "Cable" antenna signal programs
3. Press or to select "Auto Ch Search", then
press to perform Auto Ch Search function.
To stop scanning, press MENU at any time.
4. The Auto Scan screen will be shown, and after it
is done, the screen will return to the first found
channel.
Viewing the Menus
1. Press the MENU button to display the OSD
main menu. There are Four top menus on the
screen: Setup, Video, Audio, and Feature.
2. Press or to select your desired top menu.
3. Press ENTER or
select.
4. Use to select the control you want to adjust.
5. When selecting the control with
enter next level menu or enable the function.
6. Press to adjust or select the settings.
7. Press MENU to exit from the OSD menu.
Adding a channel label
1. Press MENU. The OSD menu opens with Setup
highlighted.
2. Press to enter the sub-menu, then press or to
highlight "Channel Labels". The Channel Label
menu opens.
3. Press or to move the cursor to the channel field,
then press or to select a channel.
4. Press or to move the cursor to the label field,
then press or to select the character.
5. Press MENU to return to the previous menu.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
to enter the menu you
, press
24
to
N4290p/ 4790p