Table of Contents
Advertisement
7
8
Press the Up/Down Arrow buttons on the remote to highlight
If the TV is connected to an external antenna, select Antenna, then press
Right Arrow and go to step 8.
Scan.
If the TV is connected to a cable service without a set-top box (cable is
Press Right Arrow to begin the channel scan.
connected directly from the wall outlet) select Cable, then press Right Arrow
and go to step 8.
Wait for the channel scan to finish.
If the TV is connected to a cable or satellite set-top box, press the EXIT button
When the channel scan is complete, the first-time setup is
on the remote, then select the input to which your set-top box is connected
complete.
(HDMI, COMP, or AV).
Advertisement
Table of Contents
