Table of Contents
Advertisement
I cannot return to
• To return to the Setup App, press MENU, then select Help > Guided Setup. Then select either Tuner Setup
the Setup App.
or Network Setup.
• Set the TV to Wide or Zoom Mode. Press MENU, then select Wide. Highlight Wide or Zoom and press OK.
There are black/gray
• Adjust the video settings of your external device (Blu-ray
or DVD player).
™
bars on the top/bottom/
• If using the RGB (computer) input, ensure you are using a supported desktop resolution.
sides of the picture.
• Some television channels add black bars to the picture.
The TV does not respond
• Insert new batteries into the remote.
when I press buttons
• Point the remote directly at the TV's sensor.
on the remote control.
• Ensure nothing is blocking the TV's sensor. (The sensor is on the front of the TV, in the lower right corner.)
• Ensure your connected devices are turned on.
The TV displays "No Signal"
• Press the INPUT button on the remote and select the input to which your device
is connected (HDMI, Composite, etc).
• Adust the Color and Tint settings in the Picture menu. See Adjusting the Picture Settings in the user manual.
The colors on the TV
• Reset the picture settings. See Resetting the Picture Settings in the user manual.
don't look right.
• Check all cables to ensure they are securely attached.
Advertisement
Table of Contents
