Vizio E32-D1 User Manual
  1. Manuals
  2. Brands
  3. Vizio Manuals
  4. LCD TV
  5. E32-D1
  6. User manual

Vizio E32-D1 User Manual

Hide thumbs Also See for E32-D1:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
USER MANUAL
E32-D1, E32h-D1, E40-D0, E43-D2, E48-D0, E50-D1, & E55-D0

Advertisement

Table of Contents
loading

Related Manuals for Vizio E32-D1

Summary of Contents for Vizio E32-D1

  • Page 1 USER MANUAL E32-D1, E32h-D1, E40-D0, E43-D2, E48-D0, E50-D1, & E55-D0...

  • Page 2: Safety Information

    Safety Information IMPORTANT SAFETY INSTRUCTIONS - E-SERIES HDTV Your HDTV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your HDTV.
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS - XR6 TABLET REMOTE Read all the safety information below before using your VIZIO XR6 Tablet Remote. For additional information, read the User Manual available directly through an application in your Tablet Remote. DRIVING SAFELY Use of your Tablet Remote while driving may cause distractions and may be prohibited in some places. Always comply with local laws and regulations when driving.

  • Page 4: Table Of Contents

    Table of Contents Getting Started ............5 E-Series TV ..................5 Basic Remote ..................7 Downloading the VIZIO SmartCast App ........8 ™ First-Time Setup ............9 Pairing your mobile device with E-Series TV ........10 VIZIO SmartCast App ..........13 ™ Register for a MyVIZIO account ............13 Navigating the SmartCast App ............

  • Page 5: Getting Started

    Getting Started E-SERIES TV Overview - Front Remote Sensor & Power Indicator When using the Basic Remote, aim it directly at this sensor. The power indicator lights up when the TV turns on, then goes out after severral seconds. To keep the power indicator LED on as long as the TV is on, see Turning the Power Indicator On or Off on page 59.

  • Page 6: Input Button

    Overview - Back Power Button Volume Up/Down Buttons Input Button USB 2.0 Port Component Ports HDMI Port Coaxial Port Optical/SPDIF Audio Out Port HDMI Ports RCA Audio Out Ports Ethernet Port Note: The images shown here are for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.

  • Page 7: Basic Remote

    BASIC REMOTE Overview Use the Basic Remote to control the basic functions of the E-Series TV. Input Power Change the currently Turn the TV on or off. displayed input. Closed Caption Link Turn Closed Captions on Activate pairing mode. or off. (Between TV and your device) Volume Up/Down Channel Up/Down...

  • Page 8: Downloading The Vizio Smartcast App

    Use your smartphone or tablet to tap, swipe, or use voice controls to access a library of casting content. To use your smartphone or tablet as your SmartCast Remote, download the VIZIO SmartCast on your compatible mobile device and follow the on-screen instructions to pair your device with your E-Series TV.

  • Page 9: First-Time Setup

    And then just tap to cast the content to your VIZIO TV - from anywhere in your home. It works over WiFi, so you can control your VIZIO TV from any room, and keep using your device to continue browsing, play games, text or even watch another show, without disrupting what’s playing on your TV.

  • Page 10: Pairing Your Mobile Device With E-Series Tv

    Your Device Select your language and tap Next to continue. Hold your device close to the VIZIO logo on the bottom right corner of the TV for a few seconds to pair it with the E-Series TV. Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
  • Page 11 Use your device to name your E-Series TV. Take a moment to read the VIZIO Terms of Service and Privacy Policy, as well as Google’s Terms of Service and Privacy Policy. When you are done, tap NEXT to continue.
  • Page 12 Use your device to sign into your existing Google account. If you do not have one, tap Or create a new account to create a new account. Follow the on-screen instructions to complete the First-Time Setup. The First-Time setup is complete. The VIZIO SmartCast App is displayed. ™...

  • Page 13: Vizio Smartcast ™ App

    Tap Create an Account to register for a MyVIZIO account. Follow the on-screen instructions to complete the registration process. If you do not want to register for a MyVIZIO account, tap Skip to continue. To take full advantage of the VIZIO SmartCast app, VIZIO ™...

  • Page 14: Navigating The Smartcast App

    NAVIGATING THE SMARTCAST ™ After you Creating/Logging into your MyVIZIO account, the home page of the SmartCast™ app is displayed. Search Menu Device Power Device Settings Device Input Change Aspect Ratio Change Picture Modes Volume Controls Device Menu The Device Menu is available throughout the SmartCast app, allowing you to easily access the device controls.
  • Page 15 Swipe to reveal a list of content categorized into TV Shows, Movies, Music, Live TV, Kids, and Live Streams. You can also access these categories by tapping the button in the top left corner. Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

  • Page 16: User Profile Settings

    USER PROFILE SETTINGS Every user can register their very own user profile (MyVIZIO, Facebook, or Google), keeping their personalized watchlists and collections. To access the Profile page: Tap the button to reveal the side menu. Tap View Profile. Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
  • Page 17 To modify the account settings: Tap the button to access the account settings page. You can change the First Name, Last Name, E-mail Address, and password by tapping on each of them. To edit profile settings: From the Profile page, tap Edit Profile. You can edit the Profile Color, Profile Name, and Location by taping on each of them.

  • Page 18: Picking Something To Watch

    PICKING SOMETHING TO WATCH After you get the hang of using the SmartCast app, it’s time for you pick and choose something to watch. Tap on TV Shows, Movies, Live TV, Kids, or Live Steam from the Home page. Depending on which category you pick, the content will be organized into several collections (scroll up and down to reveal additional collection).
  • Page 19 Tap on the title you want to watch to see information regarding the cast, meta scores, and etc. A) Tap on the play button. B) Select On Demand or On Now (Online feed ) and tap the play button. C) For On Demand: Select a source and tap the play button. D) Your title begins playing on your TV.

  • Page 20: Picking Something To Listen To

    PICKING SOMETHING TO LISTEN TO If you are in the mood to listen to some music, you can also browse directly from the SmartCast app. Tap on Music from the Home page. Music will be organized into several collections (scroll up and down to reveal additional collection).
  • Page 21 Tap on the content you want to listen to. A) Tap on the play button. B) Select On Demand or On Now (Online feed ) and tap the play button. C) For On Demand: Select a source and tap the play button. Your content begins playing on your SmartCast device.

  • Page 22: Watchlists

    WATCHLISTS While you are browsing for content, you can add titles to a watchlist (My Watchlist) where you can easily access them whenever you want. You can also set alerts to notify you when new episodes are available to watch. To add content to a watchlist: From the Home page, tap on TV Shows, Movies, Kids, or Live Streams.
  • Page 23 button and select Add to My Watchlist to add the title to Tap on the your watchlist. The Add to Watchlist menu appears. Here you can set an alert for the title, alerting when it will be aired. Tap on Set Alert to turn the notification on. Alert Types: New Airings Only, Live Airings Only, Unwatched Airings Only, or All Airings.
  • Page 24 To view, edit, and watch titles from your watchlist: Tap on the button and select My Watchlist. The My Watchlist menu is displayed. Tap on a title, select and source, and the content begins to play. Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
  • Page 25 To edit alerts and remove a title from your watchlist: From the My Watchlist menu, tap on the button on each title to edit alerts or remove it from the watchlist. Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

  • Page 26: Collections

    COLLECTIONS Add movies, and TV shows to your Collections, to build personally categorized lists of content. To add content to a Collections list: Choose a title you want to add to a collection and tap on the button and select Add to Collection. The Add to Collection menu appears.
  • Page 27 To view, edit, and watch titles from your Collections: Tap on the button and select Collections. The Collections menu is displayed. Tap on a title, select and source, and the content begins to play. Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
  • Page 28 To remove titles from your Collection list(s): From the Collections menu, tap on the Collection that contains the title you want to remove. to remove the title from the collection. Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

  • Page 29: Watching Live Tv

    Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model. * Live TV listings compatible with IP-based set-top boxes from DirecTV and Dish Network services, with more services to be added. See vizio.com/smartcast for details.
  • Page 30 If you chose Add a Channel Lineup for an Unsupported Device, follow the on-screen instructions to complete the setup. Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
  • Page 31 After you setup a TV connection, you can browse through the broadcast schedule, add programs to your Favorites and Watchlists. To browse through the Live TV broadcast schedule: From the Home page, tap on Live TV or select Live TV from the menu.
  • Page 32 To add content programs to your Favorites or Watchlists: • From the schedule page, tap on the button. Tap Add To/Remove From Favorites to add/remove the program from your favorites list. Tap Add To My Watchlists to add the program to your watchlist. To remove the program from your watchlist, see Watchlists on page 22.

  • Page 33: Managing Categories

    MANAGING CATEGORIES You can add, remove, and rearrange the content categories on the Home page to your preference. All but the Movies and TV Shows categories can be removed. To add or remove a category: From the Home page, tap on the button and select Manage Categories.

  • Page 34: Device Settings

    SETTING UP ADDITIONAL SMARTCAST DEVICES To add additional SmartCast devices: From the Home page, tap on the button and select Device Settings. The VIZIO Devices menu is displayed. Tap ADD NEW DEVICE and follow the on-screen instructions to pair your SmartCast device.
  • Page 35 To remove a SmartCast device: • From the VIZIO Devices menu, tap on the button and tap Remove to remove the SmartCast device from the SmartCast App. To modify SmartCast device settings: From the VIZIO Devices menu, tap on the SmartCast device listed. •...
  • Page 36 To change your SmartCast device name: From the TV Settings menu, tap on Device Name and enter a new • name. Tap Save when you are done.

  • Page 37: Adjusting Picture Settings

    ADJUSTING PICTURE SETTINGS In addition to letting you browse, watch, and listen to content, the VIZIO SmartCast App lets you adjust your SmartCast TV Settings directly from the App. To access the Picture settings menu: • From the TV Settings menu, tap on Picture. The Picture menu is displayed.
  • Page 38 Your VIZIO TV can be adjusted to suit your preferences and viewing conditions. Tap on each setting to see the available settings. Adjust settings with sliders by sliding your finger left to decrease and right to increase. Changes made while on any preset picture mode will add an...
  • Page 39 • Backlight • Adjusts the LED brightness level to affect the overall brilliance of the picture. Backlight cannot be adjusted on some picture modes. • Brightness • Adjusts the black level of the picture. When this setting is too low, the picture may be too dark to distinguish details.
  • Page 40 • Active LED Zones † • Dynamically improves the contrast ratio of the picture by adjusting the backlight. The adjustment is controlled by the content on the screen. Swipe left to Disable and right to Enable. • Clear Action • When enabled, reduces blur in scenes with fast action.

  • Page 41: Adjusting The Picture Mode Edit Settings

    Adjusting the Picture Mode Edit Settings Picture Mode Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings. • Save Picture Mode • Save a custom picture mode. • Lock Picture Mode •...
  • Page 42 Locking/Unlocking a Custom Picture Mode Custom picture modes can be locked/unlocked with a unique PIN to prevent accidental changes to their settings. To lock all custom picture modes: From the Picture Mode Edit menu, swipe the Lock Picture Mode switch to the right to lock a picture mode.
  • Page 43 Deleting a Custom Picture Mode Custom picture modes that are no longer needed can be deleted. Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode. To delete custom picture modes: From the Picture Mode Edit menu, Tap Delete Picture Mode.

  • Page 44: Adjusting The Color Calibration Settings

    Adjusting the Color Calibration Settings Use the color calibration settings to calibrate the image using HSB, offset, gain, and 11 point white balance. You can also reset the color tuner values and perform calibration tests. Current Picture Mode Current Color Temperature To access the color calibration settings menu: From the Picture menu, tap Color Calibration.
  • Page 45 Enabling/Disabling Calibration Tests To enable/disable calibration tests: From the Color Calibration menu, tap Calibration Tests. The Calibration Tests menu is displayed. Select the test pattern you wish to enable. Adjust settings with switches by swiping left to disable and right to enable.

  • Page 46: Adjusting Audio Settings

    ADJUSTING AUDIO SETTINGS To access the Audio settings menu: • From the TV Settings menu, tap on Audio. The Audio menu is displayed. • From the Device Menu, tap on the button. The TV Settings menu is displayed. Then tap on Audio to access the Audio menu.
  • Page 47 To adjust the audio settings: • Speakers (TV Speakers) - Turns the built-in speakers on or off. Select Auto to have the TV automatically detect if there are any devices (such as a sound bar) connected to the Audio Out output ports.

  • Page 48: Adjusting Timer Settings

    ADJUSTING TIMER SETTINGS To access the Timers settings menu: • From the TV Settings menu, tap on Timers. The Timers menu is displayed. • From the Device Menu, tap on the button. The TV Settings menu is displayed. Then tap on Timers to access the Timers menu.

  • Page 49: Activating The Sleep Timer

    Activating the Sleep Timer When activated, the TV’s sleep timer will turn the TV off after a set period of time. To activate the sleep timer: From the Timers menu, tap Sleep Timer. Select the period of time after which you want the TV to go to sleep: 30, 60, 90, 120, or 180 minutes.

  • Page 50: Adjusting Network Settings

    ADJUSTING NETWORK SETTINGS To access the Network settings menu: • From the TV Settings menu, tap on Network. The Network menu is displayed. • From the Device Menu, tap on the button. The TV Settings menu is displayed. Then tap on Network to access the Network menu.

  • Page 51: Using The Network Connection Menu

    Using the Network Connection menu Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-AC. Connecting to a Wireless Network To connect to a wireless network whose network name (SSID) is being broadcast: If your TV is connected to a network with an Ethernet cable, you will not see the wireless network connection menu.
  • Page 52 Finding the MAC Addresses for Network Setup The security settings on your router may require you to enter the TV’s MAC address in the router’s settings. To find the TV’s MAC address: From the Network menu, tap Manual Setup. The Manual Setup menu is displayed.
  • Page 53 Testing your Network Connection To test your network connection: From the Network menu, tap Test Connection. The Test Connection menu is displayed. When the test is complete, your connection results are displayed.

  • Page 54: Renaming Devices On The Input Menu

    RENAMING DEVICES ON THE INPUT MENU To access the Inputs menu: • From the TV Settings menu, tap on Inputs. The Inputs menu is displayed. • From the Device Menu, tap on the button. The TV Settings menu is displayed. Then tap on Inputs to access the Inputs menu.

  • Page 55: Renaming Devices On The Input Menu

    Renaming Devices on the Input Menu You can rename the inputs to make them easier to recognize on the Input menu. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player”. To change the name of an input: From the Inputs menu, tap Name Input.

  • Page 56: Changing The Tv System Settings

    CHANGING THE TV SYSTEM SETTINGS To access the System Settings menu: • From the TV Settings menu, tap on System. The System menu is displayed. • From the Device Menu, tap on the button. The TV Settings menu is displayed. Then tap on System to access the System menu.

  • Page 57: Viewing System Information

    Using the System menu, you can: • View system information • Change the on-screen menu language • Set country • Set time zone and local settings • Adjust CEC settings • Adjust when the power indicator is illuminated • Reset the TV Settings & set up administrative controls Viewing System Information To view a summary of the TV Settings:...

  • Page 58: Setting The Time And Local Settings

    Setting the Time and Local Settings To ensure the correct time is displayed, set the TV’s time zone: From the System menu, tap Time & Local Settings. The Time & Local Settings menu is displayed. • Use Internet Time - Swipe the switch to the right to have the TV sync the time online.

  • Page 59: Turning The Power Indicator On Or Off

    Turning the Power Indicator On or Off The power indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the indicator to be on. To turn the power indicator light on or off: •...

  • Page 60: Adjusting The Reset & Admin Settings

    Adjusting the Reset & Admin Settings You can use the TV’s Reset & Admin menu to set a System PIN, restore the TV to its factory default settings, enable/disable Smart Interactivity, and enable/disable the Store Demo. To set a system PIN code: From the Reset &...
  • Page 61 To turn Smart Interactivity on or off: • From the Reset & Admin menu, tap Smart Interactivity. Tap Off or On. To enable/disable the Store Demo: • From the Reset & Admin menu, tap Store Demo. Tap Disable or Enable.

  • Page 62: Manage Mobile Devices

    MANAGE MOBILE DEVICES To access the Mobile Devices menu: • From the TV Settings menu, tap on Mobile Devices. The Mobile Devices menu is displayed. • From the Device Menu, tap on the button. The TV Settings menu is displayed. Then tap on System to access the System menu.

  • Page 63: Paired Mobile Devices

    Paired Mobile Devices The Mobile Devices menu provides a list of mobile devices paired to the TV. You can use this menu to delete a pair device from TV. To delete a paired device: From the Mobile Devices menu, tap the button next to the device you want to delete.

  • Page 64: Troubleshooting

    Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications. REGISTER YOUR VIZIO PRODUCT NOW...

  • Page 65: Specifications

    Specifications E32-D1 Screen Size: 32” Class Viewable Area: 31.50” Dimensions w/ Stand: 28.77 x 18.83 x 7.87” (73.06 x 47.83 x 20.00 cm) Dimensions w/o Stand: 28.77 x 16.96 x 2.99” (73.06 x 43.08 x 7.60 cm) Weight w/ Stand: 11.68 lb (5.30 kg)
  • Page 66 E32h-D1 Screen Size: 32” Class Viewable Area: 31.50” Dimensions w/ Stand: 29.00 x 18.97 x 7.85” (73.66 x 48.18 x 19.94 cm) Dimensions w/o Stand: 19.00 x 17.10 x 3.00” (73.66 x 43.43 x 7.63 cm) Weight w/ Stand: 12.02 lb (5.45 kg) w/o Stand: 11.73 lb (5.32 kg) LCD Backlight:...
  • Page 67 E40-D0 Screen Size: 40” Class Viewable Area: 40.00” Dimensions w/ Stand: 36.20 x 23.24 x 8.23” (91.94 x 59.03 x 20.90 cm) Dimensions w/o Stand: 36.20 x 21.09 x 2.91” (91.94 x 53.56 x 7.40 cm) Weight w/ Stand: 16.76 lb (7.60 kg) w/o Stand: 16.31 lb (7.40 kg) LCD Backlight:...
  • Page 68 E43-D2 Screen Size: 43” Class Viewable Area: 43.00” Dimensions w/ Stand: 38.39 x 24.54 x 8.23” (97.50 x 62.33 x 20.90 cm) Dimensions w/o Stand: 38.39 x 22.38 x 3.39” (97.50 x 56.85 x 8.60 cm) Weight w/ Stand: 21.38 lb (9.70 kg) w/o Stand: 21.01 lb (9.53 kg) LCD Backlight:...
  • Page 69 E48-D0 Screen Size: 48” Class Viewable Area: 47.60” Dimensions w/ Stand: 42.83 x 27.22 x 10.59” (108.79 x 69.15 x 26.91 cm) Dimensions w/o Stand: 42.83 x 24.84 x 2.91” (108.79 x 63.09 x 7.40 cm) Weight w/ Stand: 26.46 lb (12.00 kg) w/o Stand: 25.57 lb (11.60 kg) LCD Backlight:...
  • Page 70 E50-D1 Screen Size: 50” Class Viewable Area: 49.50” Dimensions w/ Stand: 44.40 x 27.97 x 10.04” (112.78 x 71.04 x 25.50 cm) Dimensions w/o Stand: 44.40 x 25.61 x 2.99” (112.78 x 65.04 x 7.60 cm) Weight w/ Stand: 27.34 lb (12.40 kg) w/o Stand: 26.68 lb (12.10 kg) LCD Backlight:...
  • Page 71 E55-D0 Screen Size: 55” Class Viewable Area: 54.64” Dimensions w/ Stand: 48.98 x 30.69 x 10.59” (124.40 x 77.95 x 26.91 cm) Dimensions w/o Stand: 48.98 x 28.30 x 2.91” (124.40 x 71.89 x 7.40 cm) Weight w/ Stand: 32.85 lb (14.90 kg) w/o Stand: 32.00 lb (14.50 kg) LCD Backlight:...

  • Page 72: Warranty Information

    If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue informally and wish to file a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the procedures described below, unless an exception applies.
  • Page 73 IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of the date that you purchased the product; (2) your written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department;...

  • Page 74: Legal & Regulatory

    All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO’s privacy policy, which may be updated from time to time, and is available to view at http://www.vizio.com/privacy.
  • Page 75 FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 76 © 2016 VIZIO INC. ALL RIGHTS RESERVED. 160426AD-US-NC...

This manual is also suitable for:

E32h-d1E40-d0E43-d2E48-d0E50-d1E55-d0

Table of Contents