Vizio E320VT Quick Start Manual page 9

7
Initial Setup
Please select your input source:
Back Select
If the TV is connected to an external antenna, select Antenna, then press
Right Arrow and go to step 7.
If the TV is connected to a cable service without a set-top box (cable is
connected directly from the wall outlet) select Cable, then press Right Arrow
and go to step 7.
If the TV is connected to a cable or satellite set-top box, press the EXIT button
on the remote, then select the input to which your set-top box is connected
(HDMI, COMP, or AV).
Tuner
Antenna
Cable
Next Exit
EXIT
8
Initial Setup
Please connect your cable or
antenna to the DTV/TV input
Back Select
Press the Up/Down Arrow buttons on the remote to highlight
Press Right Arrow to begin the channel scan.
Wait for the channel scan to finish.
When the channel scan is complete, the first-time setup is
complete.
Channel Scan
Scan
Skip Scan
Next Exit
EXIT
Scan.