Watching Channels From An External Device; Using Auto Mode; Sleep Timer; Freeze Mode - Magnavox 19ME402V Owner's Manual

Watching channels from an external device
Switching Each Input Mode can easily switch with the remote control
between TV (DTV or Analog TV) and external devices when they are
connected to the unit.
1
Turn On a set-top box or the connected device.
• The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press SOURCE repeatedly to select the set-top box or the
connected device and wait a few seconds till the picture appears.
e.g.)
Source
11.1
TV
HDMI1
DTV / T V channel
HDMI2
HDMI3
Video
PC
PC
• Pressing ▲ reverses the direction of the Input modes.
• The above image is an example for 26 inch and larger screen
size TVs. It may differ depending on what product you purchased.
2
Use the remote control of the set-top box or the connected device
to select channels.
Using auto mode
1
Press AUTO MODE to set your TV to a predefined picture and
sound setting.
2
Use ▲▼to select one of the following settings :
Auto picture Auto sound
Personal
Standard
Vivid
Sports
Movie
Game -
Eco -
- Music
- News
HDMI1 HDMI2
Video
or
HDMI3
Component
Description
The customized settings you defined using
the Picture and Sound menu
For normal TV viewing
Enhanced picture contrast, sharpness and
sound for viewing in a well-lit room
Brilliant picture settings and clear sound for
high action
Deep picture and powerful sound settings
for a cinematic experience
Optimized for PCs and game consoles
Eco TV settings for low power
consumption
Optimized for music playback
Controls picture tone and set the anchor's
voice at a comfortable volume
Sleep timer
Sleep Timer can set the unit to go into Standby mode after an
incremental period of time.
Press SLEEP repeatedly to change the amount of
time (increases the time by 30 minutes up to 120
minutes).
Press SLEEP once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until Off is displayed.
Freeze mode
(Available for 26 inch and smaller screen size TVs)
Freeze Mode can freeze the image shown on the TV screen for 5
minutes.
Press FREEZE to freeze the image.
Freeze
• The sound Output will not be paused.
• To cancel freeze mode, press any buttons except .
Switching audio mode
DigitalTVoperation
1
Press SAP to display the currently selected
language and the number of available languages.
2
Press SAP repeatedly to cycle through the available audio languages.
Note
•
Available languages differ depending on the broadcast.
•
Other is displayed when the audio language cannot be acquired or the acquired
languages are other than English, French or Spanish.
Analog/CableTVoperation
1
Press SAP to display the currently selected audio mode.
2
While receiving an MTS broadcast, press
repeatedly to cycle through the available audio
channels.
e.g.) When all audio are available
SAP / STEREO SAP / MONO
STEREO : Outputs stereo-audio
SAP
: Outputs second audio program
MONO : Outputs mono-audio
Sleep 120min.
11.1
English 1/3
11
SAP / STEREO
SAP / STEREO
14
English