Canon PIXMA MP600R Setup Manual page 59

Setting up for use with USB connection
This section describes how to set up the machine to be used with USB connection.
1
Confirm that the screen shown on the right
appears.
Important
This step should follow from step 9 in "Installing the
Software" on page 42. If the Setup Preparations
screen has not displayed yet, go back to the procedure
in "Installing the Software" on page 42 to complete the
installation of the software.
2
Connect the machine with a USB cable.
3
Turn on the machine.
4
Click OK on the Setup Preparations screen.
56 Setting Up the Machine and the Computer (Macintosh)