Canon PIXMA MP600R Setup Manual page 56

5
Select Setup in the Canon IJ Network Tool
pop-up menu and MP600R in Printers, then
click OK.
If the Canon IJ Network Tool does not start up
automatically, select Library > Printers > Canon >
BJPrinter > Utilities > Canon IJ Network Tool.
Note
If no printer is detected, make sure that your
machine is connected with a USB cable and turned
on, then click Update.
If the machine's network settings are already
configured, the Setup Environment Confirmation
dialog box appears asking for your confirmation to
use the machine with the current settings. You can
proceed with the setup using the current network
settings. To do so, click Use as is. To reconfigure
the network settings, click Reconfigure.
6
Select Wired LAN.
Note
If the wireless LAN settings are already configured, the
Note on Network Settings dialog box is displayed.
Generally, click Wired Connection Only to enable
only wired LAN.
7
When the screen shown on the right appears,
connect the machine to the network devices
such as hubs with a LAN cable and click Yes.
Then click OK.
Note
Connection may vary depending on your network
environment.
Setting Up the Machine and the Computer (Macintosh) 53