Connect To Your Wireless Network - Coby IR825 - Network Audio Player Quick Setup Manual

Connect to Your Wireless Network

You will need to configure the IR850 to connect to the internet through
your wireless network the first time you use it. After that, the IR850 will
automatically connect to the internet using these saved settings un-
less you reset the unit to its factory-default settings.
1) Connect the Power.
Plug one end of the power adapter into the Power jack located on
the bottom of the unit, then plug the other end into an AC 100-240V
wall outlet. Press to turn the radio on.
2) Switch to Internet Radio mode.
When the unit turns on, the Main menu will be displayed. Press
or to choose <Internet Radio> and then press
3) Select Your Region.
or
Press to choose your region from the menu and then press
to confirm. The network wizard will launch.
4) Select Your Network (SSID).
The unit will scan the area and display all available networks. The
name of your network is determined by the SSID setting of your
wireless access point.
or
a) Press to choose the name of your network from the
menu list and then press
does not have WEP or WPA security enabled, the unit will finish
connecting to the network and return to the Internet Radio menu.
b) If the name of your network does not appear in the list, select
<Rescan> to have the unit try to find your network again.
to confirm.
to confirm. If your network
c) If you still cannot find your network, your router may be con-
figured to hide your SSID name. In this case, you will need to
enter your network settings manually. Choose <Manual config>
from the menu and press
5) Enter the WEP/WPA Password.
If security is enabled, you will be asked to input the WEP or WPA
password. A password entry screen will display as follows:
or
• Press to scroll through the alphanumeric character list.
Press to input a character.
• Press to scroll quickly through the character list in re-
verse.
• If you make a mistake while entering your password, select the
' < ' icon to delete the previous character.
• Select the ' ' icon when you have finished entering your pass-
word. The unit will finish connecting to the network and return to
the Internet Radio menu.
For help with advanced wireless router configurations, please refer
to the router's documentation. The MAC address of the unit can be
found in the System Settings menu (Main Menu > System settings
> Network > View settings > MAC Address).
to confirm.