TUNING
Automatic Tuning
Press and hold the TUNING DOWN / UP button to scan to the previous / next station
within reception range.
Manual Tuning
Press the TUNING DOWN / UP button to change the frequency down / up by one step.
Direct Tuning
Use Direct Tuning to enter a specific station frequency to tune to directly.
In the AM/FM mode, press the ENTER button to enter the direct tuning mode. Press the
NUMBER buttons to enter the desired frequency, and press the ENTER button.
Preset Tuning
You can store up to 0 preset radio stations: 0 for AM and 0 for FM. Press the
NUMBER button to tune to the station that corresponds to that preset station number
(0-9). The radio will go to the stored station, and the preset number and the frequency
are shown on the display
Storing Preset Stations
.
Select a frequency band and then tune to the desired station (e.g., "89.5 FM").
.
Press the TIME SET / MEMORY button. "M" will flash on the top right of the LCD. Press
a number button (e.g., "0"), and then press the TIME SET / MEMORY button to finish
storing the radio station. The preset number will be displayed on the right of the LCD.
CLOCK/ALARM/TIMER FUNCTIONS
Displaying the Clock and Alarm Timers
When the radio is off, the clock time is displayed on the LCD. When the radio is on,
the frequency is displayed. Press the TIME button to display the time; press it again to
display the Alarm time; press it a third time to display the Alarm time; and press it
once more to return to the frequency display.
Setting the Clock and Alarm Timers
Ensure that the radio is off, then:
.
Press the TIME SET / MEMORY button. The clock time will flash. Press the HOUR and
MIN. buttons to adjust the clock time (ensure that the AM/PM hour is set correctly).
.
When you have finished setting the clock time, press the TIME SET / MEMORY
button again. "AL" will appear on the bottom of the LCD, and the Alarm time will
flash. Press the HOUR and MIN. buttons to adjust the Alarm 1 time (ensure that the
AM/PM hour is set correctly).
.
When you have finished setting the Alarm 1 time, press the TIME SET / MEMORY
button again. "AL" will appear on the bottom of the LCD, and the Alarm time will
flash. Press the HOUR and MIN. buttons to adjust the Alarm 2 time (ensure that the
AM/PM hour is set correctly).
- 4 -