Wireless Mac Filter; Network Settings - Vizio XWR100 User Manual

Use this method if your client device asks for your router's PIN number.
Enter the PIN number listed on this screen and on the Quick Setup Guide. The wireless device will connect to your router using that PIN.
Advanced
A new menu will be displayed showing the advanced options available for the Advanced Wireless Settings. Choose a Network Name from the
drop down list to change the settings for that network.

WIRELESS MAC FILTER

Enter MAC addresses in the spaces provided to prevent or permit wireless devices with those addresses from accessing the wireless
network. Click Wireless Client List to add MAC addresses by choosing them from a list of clients detected by your router. Click MORE
to add more addresses.

NETWORK SETTINGS

Network Mode
5 GHz: Select the wireless mode used by the network. Choose from Disabled, Mixed, Wireless-A Only, or Wireless-N
Only.
2.4 GHz: Select the wireless mode used by the network. Choose from Disabled, Mixed, Wireless-G Only, Wireless-B
Only, or Wireless-BGN.
Network Name (SSID): Each wireless network has a unique name
or SSID. Your three wireless networks have default names which you
can customize. If you change the name, consider using something
unique to make sure it is not the same as other wireless networks
that your router may detect in the area. Do not use personal
information that can be visible to other users in your area searching
for wireless networks.
Channel Width
5 GHz: Select Auto (20MHz or 40MHz) for best
performance in a network using Wireless-A and Wireless-
N (5 GHz) devices. Select 40MHz only for a channel
width of 40 MHz and select 20MHz only for a channel
width of 20 MHz.
2.4 GHz: Select Auto (20MHz or 40MHz) for best
performance in a network using Wireless-B, Wireless-G
and Wireless-N (2.4 GHz) devices. Select 40MHz only for
a channel width of 40 MHz and select 20MHz only for a
channel width of 20 MHz.
Wide Channel
5 GHz: Select 40MHz only or Auto (20MHz or 40MHz) to have this setting be available for your primary Wireless-N (5GHz)
channel. Select Auto if you are not sure which channel to select.
2.4 GHz: Select 40MHz only or Auto (20MHz or 40MHz) to have this setting be available for your primary Wireless-N
(2.4GHz) channel. Select Auto if you are not sure which channel to select.
Standard Channel
5 GHz: Select the channel for Wireless-A and Wireless-N (5GHz) networking. If you selected 40MHz only or Auto (20MHz or
40MHz) for Channel Width, then the Standard Channel will be a secondary channel for Wireless-N (5GHz). Select Auto if you
are not sure which channel to select.
2.4 GHz: Select the channel for Wireless-B, Wireless-G, and Wireless-N (2.4GHz) networking. If you selected 40MHz only or
Auto (20MHz or 40MHz) for Channel Width, then the Standard Channel will be a secondary channel for Wireless-N (2.4GHz).
Select Auto if you are not sure which channel to select.
SSID Broadcast: Hide your network name (SSID) so people who are not on your network cannot see it in their list of available networks.
AP Isolation: This isolates all wireless clients and wireless devices on your network from each other. Wireless devices will be able to
communicate with your router but not with each other.