Table of Contents
Advertisement
Your router's USB port connects to a USB storage device, so you can access your files from any computer on the network. All of the files on the
storage device are shared with all of the computers on the network. See
storage device.
Restart Router
Click Restart Router to do a software restart of your router.
WIRELESS Menu
Your current wireless settings are displayed. Select Advanced to make changes to the wireless network settings. Select EDIT SETTINGS to
change the Network Name (SSID), Security Type, Security Key, or Network Status. Select WPS to set up your wireless devices using WI-FI
Protected Setup.
Edit Settings
NETWORK NAME (SSID)
Each wireless network has a unique name or SSID. Your three
wireless networks have default names which you can customize. If
you change the name, consider using something unique to make sure
it is not the same as other wireless networks that your router may
detect in the area. Do not use personal information that can be visible
to other users in your area searching for wireless networks.
SECURITY TYPE
Select from WPA2 Personal, WPA Personal, WEP 128bit, or WEP
64bit. See the Security Mode Chart above for more information.
SECURITY KEY
Enter a new security key that users must enter to gain access to your
wireless network. The key must be between 8 and 63 characters.
NETWORK STATUS
Check the box to keep that network available in your list of wireless networks or uncheck it to disable it and remove it from the list of
wireless networks.
WPS (Wi-Fi Protected Setup)
If you have a device that supports Wi-Fi Protected Setup there are three
ways to connect via WPS. Use the method that applies to the device you
are configuring.
PUSH BUTTON METHOD
Use this method if the device you are configuring has a WPS button.
1. Press the WPS button on the device you are configuring.
2. Click the WPS button on the Router Settings App. After
you have successfully connected a Success message will
be displayed.
3. Click Back to return to the main menu.
DEVICE PIN METHOD
Use this method if device you are configuring has a WPS Setup PIN
number.
1. Enter the PIN number from the device you are
configuring in the field on this screen.
2. Click the Sync button. After you have successfully connected a Success message will be displayed.
3. Click Back to return to the main menu.
ROUTER PIN METHOD
Accessing USB Storage
for more information on accessing your USB
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
