Assembly & Adjustment; Mounting The Magnet And Sensor - FUTABA GV-1 Instruction Manual

Mounting the magnet and sensor

Modify the cooling fan and install the accessory magnet and attach the mag-
netic sensor to the engine at the position shown below.
Cooling fan
Magnet and sensor mounting
Offset the sensor
center position.
ASSEMBLY & ADJUSTMENT
Magnet
Sensor case
Align the sensor center position and the
center of the magnet shown in the figure
at the left.
Sensor center position
(Embedded in cooling fan.)
Sensor
(Attached to engine
flange through a stay.)
When installing the sensor
magnet to the muffler side,
also refer to the needle side
mounting.