Set Contents/Nomenclature - FUTABA CDR5000 Instruction Manual

Set Contents/Nomenclature

Please check the contents of your shipment comparing to the parts shown here.
If you believe that you are missing any of these parts, please contact the distributor from whom you
purchased the system.
•"TX/RX Charging"
LED
•"TX/RX Discharging"
LED
Accessories
8
•LCD display
CDR-5000
•TX charge adaptor
*This is used for charging/discharging batteries for
transmitters. Please make sure that polarity is correct
before connecting the adaptor to TX/TR terminal of CDR-
5000.
•RX charge adaptor
*This is used for charging/discharging batteries for
receivers. Please make sure that polarity is correct before
connecting the adaptor to TX/TR terminal of CDR-5000.
•Terminal harness
*This is used for measuring characteristics of each cell in a
serially composed battery (2 - 6 cells). Connect the other
end of a terminal harness to the "Terminal Harness" on
CDR-5000.
•Conversion table sheet between Celsius
and Fahrenheit temperatures
•Heat sink protector
•"DX Charging" LED
•"DX Discharging" LED
•Edit keys