FUTABA 3PL-2.4G Instruction Manual page 11

E.S.C. MC230CR / MC330CR
Checker LED
Pushbutton
switch
MC230CR/MC330CR
Power switch
Applicable motors
(Number of turns is criteria.)
•Use the MC230CR with a motor with 20T or more turns.
•Use the MC330CR with a motor with 13T or more turns.
*If a motor with a number of turns smaller than the above is used, the heat
protector and overcurrent protection circuit may operate. The number of turns
of the motor is one criteria only. Depending on the running conditions, the
protection circuit may operate even if the condition above is satisfied.
(Orange)
(Blue)
(Black)
(Red)
Receiver connector
Connects to the receiver throttle channel.
Motor connector
Connects to the motor.
(Orange) is positive. (Blue) is negative.
If the motor rotates in the wrong
direction, reverse the connections.
Nicd battery connector
Connects to the running Nicd battery.
(Red) is positive. (Black) is negative.
Nicd battery 6~7 cells (7.2~8.4V)
Miniature screwdriver
Accessory. Use to press the
pushbutton switch.
Before Operation
11