Channel 3 lever
(T3FR only)
Servo reversing switches (CH.1, CH.2)
Switches that reverse the direction of operation
of the servos. The lower position (NOR) is the
normal side and the upper position (REV) is
the reverse side.
Antenna
Channel 2
trim lever
Mixing switch (for V-tail or Elevons)
In the upper position (ON), the mixing
is enabled.
Channel 2 stick
Channel 1 stick
Channel 1
Battery level indicator
Two LED display to
indicate battery voltage
level.
If the Red LED flashes,
replace batteries.
Power switch
In the upper position, the power is
turned on.
trim lever
7