q
17/15
w
r
Model 2600
q
3
w
r
e
t
y
Model 2800
e
t
Super Stretch Stitch
Machine setting
q Stitch:
17 (Model 2800)
15 (Model 2600)
w Stitch width:
5
e Stitch length:
S.S.
r Thread tension: 3 – 7
t Presser foot:
C (Model 2800)
A (Model 2600)
Model 2800:
This stitch is ideal for finishing edges of stretch fabrics. It
seams and finishes the fabric edges simultaneously.
Place the edge of the fabric next to the guide of foot and
sew while guiding the fabric edge along the guide.
y Guide
CAUTION:
Do not set the stitch width less than 5 when using the
overedge foot C; the needle may hit the foot causing
the needle to bend or break.
Model 2600:
Place the fabric to leave a 5/8" (1.6 cm) allowance.
Trim the extra allowance after sewing.
3-Step Zigzag
Machine setting
q Stitch:
3
w Stitch width:
3 – 5
e Stitch length:
0.5 – 1.5
r Thread tension: 3 – 6
t Presser foot:
A
This stitch is used to finish a raw edge on synthetics and
other fabrics that tend to pucker.
Place the fabric to leave a 5/8" (1.6 cm) allowance.
Trim the extra allowance after sewing.
It is also used for mending tears.
21