Installation; System Requirements - Wacom DTF-720 Installation Manual And User's Manual

Interactive pen display
Table of Contents

Advertisement

System requirements

Before installing the DTF-720, make sure your computer meets the following system requirements:
PC. Windows XP, XP x64, 2000, Me, or 98SE. VGA video connector, available USB port, and
CD-ROM drive.
Macintosh. OS X, v10.2.8 or greater. VGA video connector, available USB port, and
CD-ROM drive.
Note: The DTF-720 can be used alone or with another display. You may connect a second VGA
device such as a monitor or LCD projector to the DTF-720 RGB-O
the second device will mirror the image on the DTF-720. Complete the DTF-720 installation before
connecting a projection device to the unit.
Depending on the capabilities of your video card and operating system, you may be able to set up
the DTF-720 as a mirrored, extended, or independent display. Refer to your video card
documentation for more information on its capabilities.
When you are working with more than one monitor, the DTF-720 will map to the monitors based
upon how your system is configured. By default, if you are in mirror mode, the pen tablet will map to
the entire space on each display or monitor. Please refer to your hardware and operating system
documentation for details on configuring your computer and operating system for use with multiple
monitors.
There are two primary steps to the installation process:
Step 1: LCD monitor installation
Step 2: Pen tablet installation
Be sure to follow ALL instructions carefully.

INSTALLATION

port. When using this port,
UT
Installation
Page 9

Advertisement

Table of Contents
loading

Table of Contents