Multi-Ssid - D-Link AirPremier N DAP-2310 User Manual

Section 3 - Configuration
The device supports up to four multiple Service Set Identifiers. In the Basic > Wireless section, you can set the Primary SSID.
The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Enable
Check to enable support for multiple SSIDs.

Multi-SSID:

Band:
This read-only value is the current band setting.
Index:
You can select up to three multi-SSIDs. With
the Primary SSID, you have a total of four
multi-SSIDs.
SSID:
Service Set Identifier (SSID) is the name
designated for a specific wireless local area
network (WLAN). The SSID's factory default
setting is dlink.
to connect to an existing wireless network or to
establish a new wireless network.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Security:
The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802.1x. For a detailed description of the Open
System parameters, please go to page 25. For a detailed description of the WPA-Personal parameters, please go to page 26.
For a detailed description of the WPA-Enterprise parameters, please go to page 27. For a detailed description of the O802.1x
parameters, please go to page 28.
D-Link DAP-2310 User Manual
The SSID can be easily changed
Multi-SSID
32