Troubleshooting; Networking Basics; Check Your Ip Address - D-Link AirPremier N DAP-2310 User Manual

Section 6 - Troubleshooting

Troubleshooting

This chapter provides solutions to problems that can occur during the installation and operation of the DAP-2310. Read the
following descriptions if you are having problems. (The examples below are illustrated in Windows XP. If you have a different
®
operating system, the screenshots on your computer will look similar to the following examples.)
1. Why can't I access the web-based configuration utility?
When entering the IP address of the D-Link access point (192.168.0.50 for example), you are not connecting to a website on
the Internet nor do you have to be connected to the Internet.

Networking Basics

Check your IP address

After you install your network adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server
(i.e. wireless router) automatically. To verify your IP
address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click
OK.
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
D-Link DAP-2310 User Manual 71