Using Rf Link Test With Mobile Units - Intel 2011B - PRO/Wireless LAN Enterprise Access Point Configuration Manual

Figure 6-9: Test Screen Example Using the Telnet Connection
6.5

Using RF Link Test with Mobile Units

The RF Link Test may also be used to test the RF transmission paths to mobile units. In this case,
the access point does not have to be operating in the wireless access point mode. The only
requirements are that the mobile units have the same ESS ID as the access point and that they
support the WNMP.
Figure 6-10 shows an access point associating with mobile units. In this example, you can use the
RF Link Test to check the wireless path of a remote printer linked to a network through a client
bridge.
Configuring Access Point Bridging and Repeating (WLAP Mode)
Chapter 6. RF Link Test
29