Status Field Error Messages - HP 680n - JetDirect Print Server Administrator's Manual

HP Jetdirect Configuration Page
Introduction
The HP Jetdirect configuration page is an important tool for
managing or troubleshooting HP Jetdirect print servers. This page
provides identification information (such as the HP Jetdirect
model, firmware version, and LAN hardware address), as well
as status and configuration parameters of supported network
protocols. Network statistics gathered by the print server are
also provided.
The HP Jetdirect configuration page may be printed directly on the
attached printer. The format of the Jetdirect configuration page
depends on:
the printer model
I
the HP Jetdirect model and firmware version
I
For HP Enhanced I/O (EIO) printers with an HP Jetdirect EIO
print server installed, a Jetdirect configuration page will
automatically print after a printer configuration page is printed.
For instructions, see your printer manuals.
An HP Jetdirect configuration page can also be viewed over the
network from a management utility (such as HP Web Jetadmin), or
by accessing the embedded Web server on the HP Jetdirect print
server (see Chapter

Status Field Error Messages

The HP Jetdirect configuration page contains several status fields
for the print server and the supported protocols. One or more error
codes and related error messages may be displayed in a Status field.
For information on each error message, see
ENWW
4).
Table 9.12.
9
206