Table of Contents
Advertisement
The WFT Server network settings are now complete.
Configuring WFT Server Communication Settings
Turn the <5> dial to select [WFT account], and
3
then press <0>.
When changing the port number, turn the <5>
dial to select [Port number] and press <0>. Note
that there is normally no need to change the port
number (80).
Select a user number.
4
With WFT Server, you can connect the camera to
up to three computers. Here, select a user number
to prevent conflicts when users at other computers
are connected to the transmitter simultaneously.
Turn the <5> dial to select [User *], and then
press <0>.
After you select [Login name] and [Password],
5
the following input screen is displayed.
For instructions on input screen operations, refer
to "Virtual Keyboard Operation" (p.27).
51
Advertisement
Table of Contents
