You are now the proud owner of a Spring Drive Watch. For the best results, please read the instructions in this booklet carefully before using your Spring Drive Watch. Please keep this manual handy for ready reference. CONTENTS Sie sind jetzt stolzer Besitzer einer „Spring Drive“-Uhr. Lesen Sie diese Bedienungsanleitung vor der Verwendung Ihrer „Spring Drive“-Uhr aufmerksam durch, um ihre optimale Nutzung zu Page gewährleisten.
This is an automatic watch equipped with a manual winding mechanism. When first using the watch, manual winding is convenient. CROWN Caliber 5R66, which is equipped with a 24-hour hand, features an hour-hand inde- Second hand pendent adjustment function (for time difference adjustment), offering several types of 24-hour hand usage.
If your watch is completely stopped, it is recommended that you manually wind the mainspring by turning the crown. ● How to manually wind the mainspring by turning the crown (for Cal. 5R66 & 5R67) 1. Slowly turn the crown clockwise (the 12 o’clock direction) to wind the mainspring.
Page 5
• For instance, by setting the 24-hour hand Caliber 5R66 .. Refer to “● How to set the time and date, how to use the time to GMT while setting the hour and minute difference adjustment function (for Cal. 5R66)” at the bottom of hands to indicate the time in your area, you this page.
Page 6
2. Turn the crown counterclockwise to set the 24-hour and 5. Turn the crown to set the hour hand to the current hour. minute hands to the current time. Also, adjust the date at this point if necessary. Only the 24-hour and minute hands are to be set at this The moment the date changes is midnight.
Page 7
2. Turn the crown counterclockwise to set the 24-hour and 5. Turn the crown to set the hour hand to the current hour. minute hands to the time in the “different time zone (In this example, the current hour in London.) area”...
Page 8
● How to set the date When adjusting the hour hand, the other hands may move slightly. However, • This watch is designed so that the date changes one day by turning the hour hand this is not a malfunction. two full rotations in the same way as “the time difference adjustment function”.
Page 9
● Time difference table Refer to “ ● Time difference table” for time differences from GMT (UTC). When adjusting the time difference, make sure that AM/PM and the date are Refer to the table below for time differences from GMT (UTC) in major cities in the correctly set.
Page 10
● How to set the time and moon phase (for Cal. 5R67) Paris ★, Rome★, Amsterdam★ +1 hour ● How to set the time Cairo ★, Athens★, Istanbul★ +2 hours • When setting the time, ensure that the watch is working: the main ★...
Page 11
Round off the number of moon phases to the near- Tips for more accurate time setting est whole number. (Example; 7.8 ➔ 8, 24.2 ➔ 24 ) • Keep in mind the following points in order to set the time more accurately. Refer to the weather report of your local newspaper 1.
If the watch becomes wet, we suggest that you have it checked by the retailer from whom the watch was purchased or any member of the SEIKO SPRING DRIVE worldwide service network.
Page 14
• Exercise care when you hold an infant or small child while wearing the recommend that you wear a SEIKO Diver’s watch while scuba watch on your wrist, as the infant or child may be injured or develop an diving.
Avoid storing the watch in temperatures outside the normal range (below –10 ºC Inspection and overhaul of the watch will be performed by SEIKO. When you take or above +60 ºC), as the electronic components may cease to function normally or your watch to the retailer from whom the watch was purchased, make sure that the watch may stop.
TROUBLESHOOTING Possible causes Solutions Trouble Refer to “HOW TO USE” section of this booklet to wind the mainspring and reset the time. While The power supplied by the mainspring has been The watch stops operating. you are wearing the watch or when you take it off, check the remaining power shown by the power consumed.