Toshiba SD-3109 Owner's Manual page 39

AUDIO
Exte_ A_io f.l_urel
Audio Out Select _@<_>
Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see [_,
Bitstream:
Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEGt or MPEG2 decoder. _
The DVD video player outputs digital
audio information in the bitstream
format when you play a DVD video disc
recorded on the Dolby Digita!, DTS,
MPEG1 or MPEG2 recording system.
Analog 6ch: Select when connected to a Dolby
Digital ready amplifier equipped with
5.1ch audio inputs. [_
This DVD video player is equipped with
a Doiby Digital decoder
The next screen will appear for the
detailed setting.
Analog 2ch:
PCM:
Select when connected to a TV, or
Dolby Pro Logic or stereo system via
the analog audio jacks. [_[_
Select when connected to a 2 channel
digital stereo amplifier. [_
The DVD video player outputs sounds
in the PCM 2ch format when you play a
DVD video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording
system.
When you select "Analog 6Ch":
Make the following settings for the built-in 5.1ch
surround decoder
1)
2)
Select an item by pressing the • / • buttons,
and press the ENTER button.
Make the settings (see below) by pressing the
• / • / • / • buttons, and press the ENTER
bu_ton.
C,S.Speaker Size
Small: When the center speakers or surround
speakers cannot reproduce low frequency
sLgnals below 120 Hz.
Large: When the center speakers and surround
speakers can reproduce low frequency
sbgnals below 120 Hz.
C(Center) Speaker
Off: When center speakers are not connected.
Qn: When you connect center speakers.
S(Surround) Speaker
Off: When surround speakers are not connected.
On: When you connect surround speakers.
Subwoofer
Off: When a sub woofer is not connected.
On: When you connect a sub woofer
(Continued)
391