Connecting To An Audio System And Tv Equipped With Colorstream - Toshiba SD-3109 Owner's Manual

I Connecting t o an audiosystemandTVequipped withColorStream
T M
(colordifference) inputsI
E_ Signal flow
ToY
VIDEO I
OUT
ToC_ roCR
IDE(
I_ !
OU"
(red)
ro 2CH AUDIO OUT
To wall outlet
To audio inputs of the arr
To Ce video input
To Ca video
To Y video input
TV or monitor with color
difference video inputs
white]
Audio system
ColorStreanl
TM
(color difference) outputs/inputs
Some TVs or monitors are equipped with color difference inputs. Connecting to
these inputs allows you to enjoy higher quality picture playback.
Actual labels for color difference inputs may vary depending on the TV
manufacturer. (ex. Y, R-Y, B-Y or "Component video")
In some TVs or monitors, the color levels of the playback picture may be reduced
slightly or the tint may change, In such a case, adjust the TV or monitor for
optimum performance.
• Make the following setting.
Setting Select-- _Page
"Audio Out Select" "Analog 2ch"l 3_L_ [
o
0
&
0
Notes
• Refer to the owner's manual of the connected equipment as well,
• When you connect the DVD video player to other equipment be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the DVD video player near a luner or radio, the radio broadcast sound might be distoded In this case, place the
DVD video player away from the tuner and radio
• The output sound of the DVD video player has a wide dynamic range Be sure to adjust the receiver's volume to a moderate
listening level Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player's power cord if you leave the amplifier power
on, the speakers may be damaged
171