Lead-Out Symbol - Pioneer DVD-V7200 Command Manual

The available address modes are listed below:
Address Mode
FR (frame)
TM (time)
CH (chapter)
TI (title)
BK (block)
IX (index)
TR (track)
Sometimes, an Auto Stop command within a VCD Block Number Address misses the
specified address. Depending upon when the command is sent, a playback address
may be missed by a maximum of a few ten-blocks.
Execution :
Command String
TM0325SMPL<CR> R<CR>
MF<CR>
PL<CR>
5.19

Lead-Out Symbol

Function :
Format :
Explanation :
a target address for the Search or Auto Stop functions.
If the player has read the Table of Contents (TOC) from a disc, the Lead-Out Address
or a Frame Number can be translated into the time of a lead-out.
The Lead-Out Search command on a CD or VCD disc stops the player at the end of a
program area prior to the read-out area while the Lead-Out Search command on a
DVD disc stops the player at the end of this title.
NOTE: On a VCD disc, the search address is set at several seconds prior to the lead-
out point because the Lead-Out command requires the player to read video data in
advance.
Execution :
LB-compatible
DVD
X
X
X
X
Status Return
R<CR>
R<CR>
Lead-Out is set for an address
LO Command <CR>
This symbol can be used in place of a time code or a frame number as
- 25 -
Command Descriptions
CD
DVD
X
X X
X
X
X
X
X
DVD-V7200
Pause mode to Play mode
Multi-Speed mode
Play mode
plays to 3 minutes 25 seconds
Still mode
VCD
X
X
X