Search - Pioneer DVD-V7200 Command Manual

PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual
Execution :
Command String
4SPMF<CR>
30SP<CR>
5.16

Search

Function :
Format
Explanation :
with the current search address mode.
When the Search command is sent to the player, the specified address is compared
with the current address. The pick-up is moved so that the difference becomes 0.
Upon reaching the specified address, the player enters the Pause mode in CD and the
still mode in the others type discs and then returns the completed status message. If
the player misses the specified address or can not find it out , an error message (E06
or E12) is returned. However, if the disc program does not allow a time or chapter
search, the player ignores the command and an error message (E04) is returned. And
also, if the disc program does not allow a pause, the player ignores the command.
The available address modes are listed below:
Address Mode
Sometimes, an Auto Stop command within a VCD Block Number Address misses the
specified address. Depending upon when the command is sent, a playback address
may be missed by a maximum of ten-blocks.
Status Return
R<CR>
R<CR>
Search to specified address
:
Address SE
The specified address is written into the Search Register in accordance
DVD
FR (frame)
TM (time)
CH (chapter)
TI (title)
BK (block)
IX (index)
TR (track)
DVD-V7200
Play mode to
Multi-Speed to ½ Multi-Speed
LB-compatible
DVD
X X
X X
X X
X X
- 22 -
1 speed forward
/
16
CD VCD
X X
X
X
X X