Plu Preset Price Setting; Plu Association To Departments; Plu Attribute Setting; Programming Rate For % & Conversion Key - Sharp ER-A320 Programming Manual

5) PLU PRESET PRICE SETTING

Not changed
XXX PLU YYYYYYY
PLU code
X X X : PLU CODE (001 to 999)
YYYYYYY : UNIT PRICE (7 digits)
If the record of entered PLU code is not in PLU file at this program-
ming. it will be created in PLU file.
MRS = 0
lf the same [PLU] key is depressed, programming mode is changed
from "PRICE PROGRAMMING" to "ATTRIBUTE PROGRAMMING"
and changed to "DEPT. ASSOCIATION PROGRAMMING" by de-
pressing the [PLU] key again.
Note : Current price is displayed.

6) PLU ASSOCIATION TO DEPARTMENTS

* * *
XXX
PLU PLU PLU
PLU code
When starting setting, press [PLU] key three times. When continu-
ing the same setting. press it once.
XXX : PLU CODE (001 to 999)
AB : Dept.code = 1 to 40
If the record of entered PLU code is not in PLU file at this program-
ming, it will be created in PLU file.
MRS = 01

7) PLU ATTRIBUTE SETTING

Not changed
* *
PLU PLU
XXX
PLU code
CL
When starting setting, press [PLU] key twice. When continuing the
same setting, press it once.
XXX : PLU CODE (001 to 999)
A : Sign
+
–
B : Not used (Fixed at "0")
#/TM/SBTL CA/AT
PLU delete
VOID
DPTn
AB DPT# CA/AT
ABCDEFG @/FOR CA/AT
A
0
1
C : Taxable 4
Non taxable
Taxable
D : Taxable 3
Non taxable
Taxable
E : Taxable 2
Non taxable
Taxable
F : Taxable 1
Non taxable
Taxable
G : Amount entry type
Inhibited
Open
Preset
Open and preset
Delete
If the record of entered PLU code is not in PLU file at this program-
ming, it will be created in PLU file.
MRS = 002
If the same [PLU] key is depressed, programming mode is changed
from "PRICE PROGRAMMING" to "ATTRIBUTE PROGRAMMING"
and changed to "PLU ASSOCIATION PROGRAMMING" by de-
pressing the [PLU] key again.
Note :Current setting is displayed.
8) PROGRAMMING RATE FOR % & CONVERSION
KEY
Not changed
%n XXXXXXXX
CNVn
XXXXXXXX : 0.01% ~ 100.00% (%n)
0.0001 ~ 9999.9999 (CNVn)
MRS = 0.00%
If the same [%n] key is depressed, programming mode is changed
from "RATE PROGRAMMING" to "FUNCTION PROGRAMMING"
(from "FUNCTION PROGRAMMING" to "RATE PROGRAM-
MING").
Note : Current rate is displayed.
C
0
1
D
0
1
E
0
1
F
0
1
G
0
1
2
3
4
#/TM/SBTL CA/AT