Vga Problems - Wacom CINTIQ 12WX - OTHER User Manual

12WX_Manual.fm Page 41 Thursday, September 13, 2007 3:38 PM

VGA PROBLEMS

The display ripples or flickers.
The display is not clear. Text or
other portions of the screen
appear blurred.
The display and LCD panel are
not lined up. The display size is
not correct.
The display ripples or shows a
moiré pattern. The display
color is not even.
•
Open the OSD menu, go to the I
A A option. If necessary, manually adjust the clock
UTO DJUST
and phase settings.
•
Verify that the display adapter or video card matches the
specifications for Cintiq.
•
Adjust the refresh rate in the Display Properties control panel.
•
Set the display resolution of your video card to 1280 x 800.
•
Turn off the Cintiq, then turn it back on.
•
Open the OSD menu, go to the I
A A option. If necessary, manually adjust the
UTO DJUST
brightness, clock and phase settings.
•
Open the OSD menu, go to the I
A A option. If necessary, manually adjust clock and
UTO DJUST
phase, and horizontal and vertical position. Note that some
video cards may not show the display in proper sizing.
•
Open the OSD menu, go to the I
A A option. If this does not solve the problem, go to
UTO DJUST
the R menu and select the F
ESET
the display back to the factory default settings.
•
Open the OSD menu, and as necessary adjust clock and
phase.
menu, and select the
MAGE
menu, and select the
MAGE
menu, and select the
MAGE
menu, and select the
MAGE
R option to set
ACTORY ESET
Troubleshooting
Page 41