Adjusting The Display; Factory Presets, Auto-Sync, And Color Calibration; Power Saving - Wacom CINTIQ 12WX - OTHER User Manual

Interactive pen display
Hide thumbs Also See for CINTIQ 12WX - OTHER:
Table of Contents

Advertisement

12WX_Manual.fm Page 29 Thursday, September 13, 2007 3:38 PM

ADJUSTING THE DISPLAY

FACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION

Factory presets: For optimal display quality, set your video card to Cintiq's native resolution of
1280 x 800 pixels (WXGA). See page 53 for signal specifications.
Auto-sync: The auto-sync function automatically sets the horizontal and vertical screen position, as
well as clock and phase. When connected as a VGA display, Cintiq attempts to automatically
synchronize to the incoming signal. At the native resolution of 1280 x 800, the vertical refresh
frequency must be set to 60 Hz. For other resolutions, auto-sync will function when the horizontal
frequency is between 31 to 82 kHz and the vertical frequency is between 56 to 75 Hz. If a specific
resolution and vertical refresh frequency are not supported, you will see an "invalid mode" message. In
this case choose a different resolution or refresh frequency.
If Cintiq does not automatically synchronize with the incoming signal in VGA mode, open the OSD
menu, select the VGA I
Additional screen display adjustments can be made using the OSD controls.
Color calibration: Changing the color, color temperature, contrast, brightness, or backlight from their
default settings will invalidate the ICC color profile that was included on the driver CD.

POWER SAVING

Cintiq conforms to VESA and ENERGY STAR
When using Cintiq with a Display Power Management Signaling (DPMS) compliant computer or video
card, the display will automatically comply with the below power saving parameters. When these
power-saving functions are in effect, the screen display is darker than usual.
Computer mode
Power ON
Standby mode
Suspend mode
OFF Mode
* Depending on the specifications and settings of your computer and video card, the power light may only change
to orange when in standby and suspend modes.
menu option, and choose A
MAGE
H-sync
V-sync
Yes
Yes
No
Yes
Yes
No
No
No
A
UTO
DJUST
®
power saving guidelines.
Video
Power consumption
Active
Blanked
Blanked
Blanked
to initiate display synchronization.
Power lamp
29 W
Blue
2 W
Orange/blue*
2 W
Orange/blue*
1 W
Orange
Customizing
Page 29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtz-1200w - other

Table of Contents