Working With Your Cintiq; Using The Grip Pen - Wacom CINTIQ 12WX - OTHER User Manual

Interactive pen display
Hide thumbs Also See for CINTIQ 12WX - OTHER:
Table of Contents

Advertisement

12WX_Manual.fm Page 18 Thursday, September 13, 2007 3:38 PM

WORKING WITH YOUR CINTIQ

USING THE GRIP PEN

The pen is cordless, battery-free, and sensitive to the tilt and pressure you exert upon it. Hold the Grip
Pen as you would a normal pen or pencil. As you work, you can rest your hand lightly on the Cintiq
display screen, just as if it were a drawing board or sheet of paper. You can tilt the pen in any way that
feels most comfortable for drawing.
DuoSwitch (side switch): Make sure the programmable switch is in a
convenient location where you can toggle it with your thumb or forefinger,
but not accidentally press it while drawing. You can use the switch
whenever the pen tip is within 5 mm (0.2 inch) of the tablet surface; you
do not need to touch the pen tip to the tablet. Toggle the switch in either
direction to activate the button functions. By default, the upper switch is
set to D
C
and the lower switch is set to R
OUBLE
LICK
Pen tip (replaceable nib): The pen is activated as soon as it is brought
within 5 mm (0.2 inch) of the pen display screen. This allows you to
position the screen cursor without touching the pen tip to the display
screen. When pressure is applied to the pen tip, the pen simulates a
primary mouse button click. The tip click pressure can be adjusted in the
Wacom Tablet control panel. By default, the tip function is set to C
Eraser: When the eraser is brought
within 5 mm (0.2 inch) of the
display the tablet reports the pen
location. Pressure information is
reported as you press down on the
eraser. By default, the eraser
function is set to E
.
RASE
Important: Only use a pen that is compatible with Cintiq, such as the pen that shipped with the
unit or any of the pens from the Intuos3 product line. Other pens may not function properly.
Also, the Cintiq pen tip is specifically designed for use with the Cintiq pen display – the tips on
other pens could damage the protective coating on the display screen.
For information on customizing the pen settings, see Customizing on page 27.
Working with your Cintiq
Page 18
C
.
K
IGHT
LIC
.
LICK
When the Grip Pen is not in
use, place it in the pen
stand or lay it flat on your
desk.
To maintain the sensitivity
of your pen, do not store the
pen in a container where it
will rest on its tip or eraser.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtz-1200w - other

Table of Contents