ConnectToYourTvAndAudioSystem - Microsoft XGX-00038 - 360 Arcade Game Console Instruction Manual

CONNECTTOYOURTVANDAUDIOSYSTEM

IMPORTANT
Stationary images in video games can "burn"
into some TV screens, creating a permanent
shadow. Consult your TV owner's manual or
manufacturer before playing games.
ConnecttheCompositeAVCable
Use your composite AV cable to connect your
console to your TV.
To connect to your standard TV:
Connect the composite AV cable connector
1
to the AV port on the console.
Connect the colour-coded connectors to
2
the corresponding inputs on the SCART
adapter and connect the SCART adapter to
the TV: yellow to yellow (video), red to red
(right audio), and white to white (left audio).
You can also connect audio to a stereo
receiver.
For monaural (mono) TVs, which have only
one audio input, connect either the right or
left audio connector to the audio input.
If your TV does not have a SCART
connector, connect the colour-coded
connectors to the corresponding inputs on
the back of your TV.
4
Select the appropriate video input on your
3
TV (see No Picture under "Troubleshooting"
for further information).
After you've set up your console, you can
configure additional console audio settings
and test your connection from the System
area of the Xbox Dashboard. But before doing
so, proceed through the steps in the following
pages for connecting to power, connecting
your controller, and other initial settings.
OtherAVInput
You can also connect to additional TV input
types by using the Xbox 360 Component HD
AV cable, the Xbox 360 Advanced SCART AV
Cable, the Xbox 360 VGA HD AV Cable, or the
Xbox 360 HDMI AV Cable (all sold separately).
For more information, go to www.xbox.com/
setup.