Troubleshooting - Nintendo GAMECUBE - Game Console Instruction Booklet

4 • MAIN MENU
Erasing a File
Use the Control Stick to highlight the file that you want to
1
erase and press the A Button.
Use the Control Stick to select "ERASE" and press the A
2
Button.
A window will appear to confirm your choice. Use the
3
Control Stick to highlight "YES" and press the A Button.
The file will be then be erased from your Memory Card.
NOTE: If you erase a file from your Memory Card, it will
be gone forever. Be careful that you don't erase a file
that you want to keep!
Formatting a Memory Card
This procedure is only used if a corrupted Memory
Card is inserted into the Nintendo GameCube.
If required, this procedure will begin automatically when
you select "Memory Card Screen" from the main menu.
You cannot use this procedure to erase files from a
useable Memory Card.
After selecting "Memory Card Screen" from the Main
1
Menu, if your Memory Card requires formatting, a window
will appear to ask for confirmation for formatting.
Use the Control Stick to select "YES" and press the A
2
Button.
A window will appear to notify you that all data will be
3
erased and ask again for confirmation for formatting.
Use the Control Stick to select "YES" and press the A
4
Button.
NOTE: When you format a Memory Card, all data will
be permanently erased and unable to be recovered.
20
Before seeking assistance review the following problems and solutions:
PROBLEM
No picture on TV screen. • Make sure that the Nintendo GameCube, TV
and VCR (if used) are plugged into power outlets.
• Make sure that the DC Jack on the AC Adapter is
firmly plugged into the DC Input Connector on the
back of the console.
• Make sure that the power switches on the Nintendo
GameCube, TV and VCR (if used) are turned ON.
• Check the connections between the console and
the TV or VCR (if used) and review the
appropriate System Setup section in this booklet
to be sure the system is set up correctly.
• Make sure all cable connectors are securely
plugged into the appropriate sockets.
• Make sure that the INPUT settings are correct for
your particular setup. (Review page 12 on INPUT
select information.)
• If you are using an RF Switch connection, make
sure that the Channel Switch and TV are set to the
same channel (3 or 4).
• Check to be sure that the Game Disc is placed
correctly into the console.
• Check to be sure that the Game Disc is clean and
in good condition. If dirty, wipe with a soft cloth
from the center to the outside.
• Remove the Game Disc, close the Disc Cover and
turn the power OFF and then ON. If the Main
Menu appears the disc may be dirty or damaged.
• Check that the Game Disc will work on your
version of the Nintendo GameCube. This system
will only work with Game Discs made for use in
the USA, Canada, Mexico and Latin America.
• You must be using a Component Video cable
Cannot access the
(sold separately, visit our web site at
progressive scan feature
www.nintendo.com or call 1-800-255-3700) to
in a game that supports
connect the Nintendo GameCube to the TV (see
progressive scan.
page 9).
• The progressive scan feature is only available on
Nintendo Gamecube Model No. DOL-001(USA).
It is not available on Nintendo GameCube Model
No. DOL101(USA).
5 • TROUBLESHOOTING
SOLUTION
21