Directory Number; Global Location - Cisco CTS-500 Configuration Manual

Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System

Directory Number

Provide directory number information for the Cisco TelePresence device using the descriptions in
Table
Only numeric values are accepted.
Tip
Table 1-6 Cisco TelePresence Directory Number
Field
Country Code
Area Code
Local Number

Global Location

Provide global location information for the Cisco TelePresence device using the descriptions in
Table 1-7
Table 1-7 Cisco TelePresence Global Location
Field
Latitude
Longitude
OL-21851-01
1-6. Click Save to save your settings.
Required? Description
— Specifies the country code for this site. Maximum field length is 4.
— Specifies the area code for this site. Maximum field length is 6.
— Specifies the subscriber number of this Cisco TelePresence endpoint. Maximum
field length is 15.
as a guide. Click Save to save your settings.
Required? Description
— Indicates the site's latitude. The format for this field is as follows: dd mm ss P
• dd—Degrees. Values are 0 to 89.
• mm—Minutes. Values are 0 to 59.
ss—Seconds (optional). Values are 0 to 59.
•
• P—Direction. Values are N (north) or S (south).
Maximum field length is 15 characters.
— Indicates the site's longitude. The format for this field is as follows: ddd mm ss P
ddd—Degrees. Values are 0 to 179.
•
• mm—Minutes. Values are 0 to 59.
• ss—Seconds (optional). Values are 0 to 59.
• P—Direction. Values are E (east) or W (west).
Maximum field length is 15 characters.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
1-19