Vacuum Assembly; Carton Contents; Charging Base Assembly; Attach Nozzle Base - Hoover BH20090 Owner's Manual

carton contents

A. Stick Vac Body
B. Hand Vac
C. 3-in-1 Tool
D. AC Adapter with IntelliCharge™ System
E. Nozzle
F. Charging Base
Remove all parts from carton and identify each
item shown.
Make sure all parts are located before disposing of
packing materials.
*Hand Vac comes packed attached to Stick Vac.

cHarGinG base asseMblY

Select a place for the charging station where the
appliance is stable and always protected from heat
and moisture during charging.
1.2 Push the upper portion of the charging station
onto the connector of the base. You must feel and
hear it click into place.
1.3 Insert AC Adapter plug (A) into bottom of
charger base (B) and fit cord snugly into cord well
so cord exits the charging base through the slot at
the rear of the charging base.

attacH nozzle base

WARNING
!
Always turn off this appliance before connecting
or disconnecting motorized nozzle.
1.4 Align bottom inlet on Stick Vac body with nozzle
connector and insert. Nozzle is securely attached
when you feel and hear it click into place.
1.5 To release Nozzle from Stick Vac, press Nozzle
release button located above nozzle on Stick Vac
body and remove.

unfold Handle

1.6 Fold the handle up into the upright position until
you hear and feel it lock into place.

1. VacuuM asseMblY

!
5
1.1
A
b
E
1.2
1.4
1.6
Actual model may vary from images shown.
C
D
F
1.3
b
1.5
A