Sdp series high resolution digital presenter rs-232c reference (12 pages)
Summary of Contents for Samsung UF-130DX
Page 1
HIGH RESOLUTION DIGITAL PRESENTER HIGH RESOLUTION DIGITAL PRESENTER RS-232C REFERENCE RS-232C REFERENCE Samsung Digital Presenter Samsung Digital Presenter (UF-130DX/ST) (UF-130DX/ST) Before attempting to operate this product, Please read the instructions carefully. Before attempting to operate this product, Please read the instructions carefully.
Page 3
RS232C Command Code (UF-130DX/ST) PC Transmit Data to MICOM PC Receive Data from MICOM Command Remark 0x01 0x00 0x05 0x00 0x01 “ACK data” 0x05 0x00 0x02 0x00 0x05 0x00 0x02 “ACK data” 0x05 0x00 Lamp ON 0x00 0x05 0x00 “ACK data”...
Page 4
Blue Down 0x00 0x0A 0x00 “ACK data” 0x0A 0x00 Overlay(PIP) 0x48 0x00 0x05 0x00 0x48 “ACK data” 0x05 0x00 <Note1> Transmitting number "9" in image divide command, the system executes 3X3 multi-screen mode. <Note 2> Overlay(PIP) function is for UF-130DX only.
Page 5
RS232C Command Code (UF-130DX/ST) PC Transmit Data to MICOM PC Receive Data from MICOM Command Remark Focus Far 0x00 0x05 0x00 “ACK data” 0x05 0x00 0x25 0x25 Focus Near 0x00 0x0A 0x00 “ACK data” 0x0A 0x00 Zoom Tele 0x00 0x05 0x00 “ACK data”...
Page 6
RS232C Command Code (UF-130DX/ST) PC Transmit Data to MICOM PC Receive Data from MICOM Command Remark Bi t defi n i t i o n of Status Set-Status(Normal ) 0x61 0x00 0x00 0x00 0x61 “ACK data” Status(MSB) Status(LSB) represents Page 7,8...
Page 7
(0,0,1,0,0): Set is executing command by RS232C (0,1,0,0,0): Set is executing command by USB (1,0,0,0,0): Set is executing command by OS System Boot Completion ("0": Booting, "1": OK) Acknowledgement Bit ("0": no-ACK, "1": ACK) <Note1> 'Set is executing command by OS' bit is for UF-130DX only.
Page 8
(1,0): Image Rotate 180˚ (1,1): Image Rotate 270˚ (0): Image Freeze OFF (1): Image Freeze ON (0): Aperture ON (1): Aperture OFF (0): DX Model (1): ST Model (0): Disable Control (1): Enable Control <Note 1> Disable/Enable Control bit is for UF-130DX only.