Led Functions Of Charger/Adapter; Charging A Hot Battery Pack; Charging A Cold Battery Pack; Defective Battery - Craftsman 26302 - Professional 20 Volt Lithium-Ion Operator's Manual

LED FUNCTIONS OF CHARGER/ADAPTER (Fig. 4)
Fig, 4
LED iNDiCATOR
_) Hi/LO TENP.
(SEE NANUAL)
DEFECTIVE
BATTERY
BATTERY [_
CHARGING
BATTERY
FULL
BATTERY RED GREEN
ACTION
PACK LED LED
Hot/Cold
On Off
battery
Defective i Flashing Off
Charging will begin when
battery returns to
32°F (0°C)-104°F (40°C)
Battery pack or Charger/
Adapter is defective
Charging Off Flashing Charging
Fully Off On Charging is complete
charged Maintenance charging
CHARGING A HOT BATTERY PACK
If the battery pack is above normal temperature range, the red LED will be lit and the green
LED will be off. When the battery pack cools down to approximately 104°F (40°C), the Charger/
Adapter will automatically begin charging.
CHARGING A COLD BATTERY PACK
If the battery pack is below the normal temperature range, the red LED will be lit and the green
LED will be off. When the battery warms to a temperature of more than 32°F (0°C), the Charger/
Adapter will automatically begin charging.
DEFECTIVE BATTERY
If the Charger/Adapter detects a problem, the red LED will begin flashing and the green LED will
be off.
m If defective, remove and reinsert the battery pack in the Charger/Adapter. If the LED status
reads "defective" a second time, try charging a different battery pack.
m If a different battery pack charges normally, dispose of the defective battery pack (see
Maintenance section).
m If a different battery pack also indicates "defective," the Charger/Adapter may be defective.
BATTERY CHARGING
If the battery pack is within normal temperature range, the green LED will begin flashing and the
red LED will be off. The battery pack will reach a full charge. The POWER BAR LED lights will
cycle right to left during charging. This is part of the normal charging operation. The POWER
BAR LED lights will not be displayed when the POWER BAR button is pressed while the battery
pack is on the Charger/Adapter.
BATTERY FULL
If the battery pack is within normal temperature range, the green LED will be lit and the red LED will
be off. The battery pack is fully charged and ready to use. The battery pack will fully charge, but will
not overcharge, if left on the Charger/Adapter. The POWER BAR LED lights will not be displayed
when the POWER BAR button is pressed while the battery pack is oil the Charger/Adapter.
NOTE: Charger/Adapter may warm up with several continuous charge cycles. This is /
part of the normal operation of the Charger/Adapter. Charge in a well ventilated area.
J
15