General Safety Rules; Work Area Safety; Electrical Safety; Personal Safety - Craftsman 26302 - Professional 20 Volt Lithium-Ion Operator's Manual

_,WARN|HG; HEAD AND UNDEHSTAND ALL INSTHUCTIONS. Failure to follow all |
instructions listed below may result in electric shock, fire and/or serious personal injury.
1
The term "power tool" in all of the warnings listed below refer to mains-operated (corded)
power tools or battery-operated (cordless) power tools.
SAVE THESE iNSTRUCTiONS
WORK AREA SAFETY
II Keep work area clean and well lit. Cluttered or dark areas invite accidents.
m Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
m Keep children and bystanders away while operating a power tool. Distractions cause you
to lose control.
ELECTRICAL SAFETY
m Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
m Avoid body contact with earthed (grounded) surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed (grounded).
m Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
m Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
m When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
m Use battery only with Charger/Adapter listed.
MODEL BATTERY PACK CHARGER/ADAPTER
320,26302 25708 320,25705
320,29032 29005 320,67099 320,t032t
320,29036 29006 320,67099 320,t032t
PERSONAL SAFETY
m Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious
personal injury.
m Use safety equipment. Always wear eye protection. Safety equipment such as dust masks,
non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will
reduce personal injuries.
m Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tools with your finger on the switch or plugging in power tools that have the
switch on invites accidents.
m Hemove any adjusting key or wrench before turning the power tool on. A wrench or key
left attached to a rotating part of the power tool may result in personal injury.
m Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.