Hard Drive Fault Led; Hot Swap Drive Bay Electronics; Figure 9: 6-Hdd Hot Swap Drive Bay, Front/Rear Isometric View; Figure 10: Drive Carrier With Air Baffle Installed - Intel SC5275-E Technical Product Specification
Server chassis
Hide thumbs
Also See for SC5275-E:
- User manual (73 pages) ,
- Install manual (34 pages) ,
- Configuration manual (7 pages)
Table of Contents
Advertisement
Intel® Server Chassis SC5275-E TPS
5
6
6.2.5
Hard Drive Fault LED
The hot-swap controller (HSC) is responsible for turning the drive fault LEDs on or off according
to the states specified via commands received from the SAF-TE controller and the IMB. The
drive fault LEDs are 4-terminal dual-color (yellow and green) and indicate the failure status for
each drive. The LEDs are physically located on the LVD SCSI backplane.
Figure 9: 6-HDD Hot Swap Drive Bay, Front/Rear Isometric View
6.2.6
Hot Swap Drive Bay Electronics
The hot swap SCSI backplane board set supports the following features:
Revision 1.2
5
6
Figure 10: Drive Carrier with Air Baffle Installed
Appendix A: Chassis Spares and Accessories
TBD
Green
TBD
Green
27
Advertisement
Table of Contents
