Viewing Existing Data - Texas Instruments TI-Nspire Manual Book

Viewing Existing Data

You can view data collected and stored from a different TI-Nspire™
application in the current application.
1. Open the document with the captured data set.
For example, open the Graphs application.
2. Click
Insert > [other application]
For example, insert Lists and Spreadsheet.
The selected application opens.
3. Click
Insert > Sensor Console
The Sensor Console area opens at the bottom of the application.
In this example a sensor is attached, but it does not have any affect on
this procedure.
.
Using the Sensors and Data with Other Applications
.
81