(2-5-4 + Menu Mode) - LG 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade Commercial Mode Setup Manual

Hospital tvs
Hide thumbs Also See for 323DCH - 32In Wide Lcd Hdtv Spk 1366X768 Hospital Grade:
Table of Contents

Advertisement

Editing/Adding Channel Icons and/or Labels
If there is no pre-assigned icon, you can make a custom
channel label of up to seven (7) characters to help identify
a channel or network. If desired, channel labels can also
be added in addition to a pre-assigned icon. You may also
add labels for the Aux input sources to clearly identify the
devices that are connected to the Aux inputs.
XYZ
Changing a Channel's Icon on
the Master TV
1. Use Channel Up/Down to select
the desired channel.
2. Use the Left/Right arrow keys
to select the thin letter "I" on the
Channel ID display.
3. Use the Up/Down arrow keys to
select the icon with which you want
to identify the channel. (If you know
the icon number, enter the number,
and press OK (Enter).)
4. Proceed to change/add channel
labels, or go to the next channel.
Installer Remote Control Key Functions for Master TV Channel Editing/Labeling Menu
Channel Up/Down: Tunes to the next channel in scan.
Left/Right Arrows: Select the item to change. If "I" is
shown, the icon can be changed. If a number is shown, it
indicates the position of the character that can be changed.
Up/Down Arrows: Select the icon or the character to be
displayed. Tip: Arrows can be held down for fast scrolling.
206-4096
Adding Channel Label Icons / Custom Channel Labels
(Icon)
XYZ
XYZ
NETWORK
(Label)
1 2 3 4 5 6 7
Changing/Adding Channel
Labels on the Master TV
1. Use Channel Up/Down to select
the desired channel.
2. Press the Left or Right arrow
repeatedly until the numbers 1 to 7
appear on the display. The number
shows the position of the character
that can be changed. Number 1 is
the fi rst character, number 2 the
second character, etc.
3. Use the Up/Down arrow keys to
select the desired character.
4. Proceed to the next number posi-
tion, or use Channel Up/Down to
go to the next channel.

(2-5-4 + MENU Mode)

Editing and adding the labels can only be done if there are
channels entered into the TV's Channel Map either during
Commercial Mode Setup (see pages 14 to 15), by cloning,
or by using some PPV providers' master remote controls.
Note: A blank letter space is available between "Z" and "!".
To perform channel editing/labeling:
1. Enter the TV Installer Menu.
2. Press 2-5-4 + MENU on the Installer Remote to enter
the Channel Label Editing Mode.
3. Add channel icons and channel labels as described in
the procedures below. (You can do this more than once.)
4. To exit the menu when you are done, press MENU.
Changing Source Labels on the
Master TV
1. Press INPUT to select the desired
2. Press the Left or Right arrow
3. Use the Up/Down arrow keys to
4. Press INPUT for the next Aux
0 – 9: Use to enter the index number of the icon, if
known.
OK (Enter): Changes the icon after the number has been
entered.
INPUT: Changes the Aux input label.
MENU: Exits the editing process.
Aux input source: A/V 1, A/V 2,
HDMI Component, RGB, etc.
repeatedly until the numbers 0 to 9
appear on the display. The number
shows the position of the character
that can be changed.
select the desired character.
source, or use Channel Up/Down
to return to channels.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

22lg3dch26lg3dch32lg3dch22lg3ddh26lg3ddh32lg3ddh

Table of Contents