Reference: Procedures For Adding Channel Label Icons/Custom Channel Labels (2-5-4 + Menu Mode); Icons/Custom Channel Labels (2-5-4 + Menu Mode) - LG 32LG700H Owner's Manual

COMMERCIAL MODE SETUP
REFERENCE: PROCEDURES FOR ADDING CHANNEL LABEL

ICONS/CUSTOM CHANNEL LABELS (2-5-4 + MENU MODE)

Adding Channel Icons and Labels in the 2-5-4 + Menu Mode
Editing/Adding Channel ICONs and/or
Labels
If there is no pre-assigned ICON, you can make a cus-
tom channel label of up to 7 characters to help in
identifying the channel or network. At your option,
channel labels can also be added in addition to a pre-
assigned ICON. You may also add labels for the Aux
input sources to clearly identify the devices that are
connected to the Aux inputs.
XYZ
Changing a Channel's ICON on
Master TV
1. With Channel Up/Down, select the
channel you want to change the
Icon for.
2. With the Right or Left ADJ arrow,
select the thin letter 'I' on the
channel ID display.
3. With the Up or Down arrow, select
the desired ICON you want to
appear to identify the channel. (If
you know the ICON number, enter
the number followed by Enter /
Select.)
4. Proceed with Changing/Adding
Labels or go to the next channel.
Installer Remote Control Key Functions for Master TV Channel
Editing/Labeling Menu
CHANNEL Up/Down - Tunes in the next channel in
I
scan.
Left/Right Arrows - Select the item to change. If "I"
I
is shown, the ICON can be changed. If a number is
shown, it indicates the position of the character that
can be changed.
Up/Down Arrows - Select the ICON or the charac-
I
ter to be displayed. Tip: Arrows can be held down for
fast scrolling.
102
(Icon)
XYZ XYZ
NETWORK
(Label)
1 2 3 4 5 6 7
Changing/Adding Channel
Labels on Master TV
1. Channel Up/Down to select the
desired channel.
2. Press the Right or Left ADJ arrow
repeatedly until the numbers 1 to
7 show up. The number shows the
position of the character that can
be changed. Number 1 is the first
character, number 2 the second
character and so on.
3. With the Up or Down arrow, select
the desired character.
4. Proceed to the next number posi-
tion or use Channel Up/Down to
go to the next channel.
Editing and adding the labels can only be done if there
are channels entered into the TV's channel map either
by using the method described in item 6 (page 18), by
cloning or by the use of the master remote control
from the PPV provider.
Note: A blank letter space is available between 'Z' and
'!' .
To Do Channel Editing/Labeling, Proceed as
Follows
1. Enter TV Installer menu.
2. Once the installer menu appears, press '2' , '5' , '4' ,
'MENU' . This enters the channel label editing mode.
Add your channel icons and channel labels in this
menu, see below. (You can do this more than once.)
3. To exit the menu when done press "MENU".
Changing Source Labels on
Master TV
1. Press "INPUT" to select the desired
Aux input source; A/V 1, A/V 2,
HDMI Component, RGB etc.
2. Press the Right or Left arrow
repeatedly until the numbers 0 to 9
shows up. The number shows the
position of the character that can
be changed.
3. Use the Up or Down arrows to
select the desired character.
4. Press "INPUT" for the next Aux
source or proceed with Changing
Icon or Changing/Adding Labels.
Press Ch Up/Down to return to
channels.
0 – 9 - Use to enter the index number of the ICON,
I
if known.
ENTER/SELECT - Changes the ICON after the
I
number has been entered.
INPUT - Changes the Aux input label. ("Source" on
I
the remote shown in this manual is INPUT.)
MENU - Exits the editing process.
I