Table of Contents
Advertisement
I
I
9.
A
CAUTION:
Remove any rust or dirt
from the wheel bolts,
mounting surfaces and
spare wheel.
-
Never use oil or grease on studs or nuts. If you
do, the nuts might come loose. Your wheel could
fall off, causing a serious accident.
Rust or dirt on the wheel, or on t L parts to
which it is fastened, can make the
wheel nuts
become loose after a time. The wheel could come
off and cause an accident. When
you change a
wheel, remove any rust or dirt from the places
where the wheel attaches to the vehicle..In an
emergency, you can use a cloth or a paper towel
to do this; but be sure to
use a scraper or wire
brush later, if ybu need to, to get all the rust or
dirt off.
10. Put on the spare tire. Put the nuts on by hand.
Make sure the cone-shaped end is toward the
wheel. Tighten each nut by hand until the wheel is
held against the hub. If a nut can't be turned by
hand, use the extension and see your dealer as
soon as possible.
5-32
Advertisement
Table of Contents
