Speed Dial; Call Pickup; Group Call Pickup - Cisco ATA186-I1 Administrator's Manual

Appendix A How to Use Pre-call and Mid-call Services

Speed Dial

To use Speed Dial, follow these steps:
Procedure
Step 1 Preset speed-dial commands by using the Cisco CallManager web page. (See Cisco CallManager
documentation for more information.) The Cisco ATA supports nine speed-dial numbers.
Step 2 To activate speed dialing, press * then a digit from one to nine on your telephone keypad, as shown in
the following examples:
•
•
•

Call Pickup

To answer a phone in your call pickup group, follow these steps:
Procedure
Step 1 Pick up the handset, press ** then 3 on your telephone keypad. The caller ID appears and the call-waiting
tone rings.
Step 2 Perform a hook flash to answer the call.

Group Call Pickup

To answer a phone outside your call pickup group, follow these steps:
Procedure
Step 1 Pick up the handset, press ** then 4 on your telephone keypad.
Step 2 When prompted, enter the group number. The caller ID appears and the call-waiting tone rings.
Perform a hook flash to answer the call.
Step 3
OL-4652-01
Press * then 1 to activate speed dial 1
Press * then 2 to activate speed dial 2
Press * then 3 to activate speed dial 3
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
Procedures for Using Pre-call Services
A-3