Status Menu; Network Statistics Screen - Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual

Status Menu

•
•
To display the Model Information screen, choose Applications > Settings > Model Information. To
exit the Model Information screen, press Exit.
Status Menu
The Status menu includes these options, which provide information about the conference station and its
operation:
•
•
•
Note The Status menu also contains a Ping menu that allows you to test network connectivity to another
conference station. For more information, see the
To display the Status menu, choose Applications > Settings > Status. To exit the Status menu, press
Exit.

Network Statistics Screen

The Network Statistics screen displays information about the conference station and network
performance.
To display the Network Statistics screen, choose Applications > Settings > Status >
Network Statistics.
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press Clear. To exit the
Network Statistics screen, press Exit.
Table 7-1
Item
Rx Frames
Tx Frames
Rx error
Rx PacketNoDes
Rx Overruns
Rx alignErr
Rx length error
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
7-2
BootROM Version—Identifier of the factory-installed load running on the conference station.
App Load ID—Identifies the firmware running on the conference station.
Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see the
Call Statistics—Displays information about the last call on the conference station. For more
information, see the "Call Statistics Screen" section on page
Device Information—Displays device settings and related information for the conference station.
For more information, see the
Table 7-1 describes the information that appears in this screen.
Network Statistics Items
Description
Number of packets received by the conference station.
Number of packets transmitted by the conference station.
Total number of FCS error packets or Align error packets received.
Total number of shed packets caused by no DMA descriptor.
Total number of received packets dropped because of buffer overruns.
Total number of packets received between 64 and 1522 bytes in length that
have bad FCS errors.
Number of packets discorded due to improper length.
Chapter 7 Viewing Model Information, Status, and Statistics on the Conference Station
"Network Statistics Screen" section on page
"Device Information Screen" section on page
"Using Ping" section on page 9-2
7-2.
7-4.
7-5.
OL-11560-01 Rev. B0