Understanding Security Profiles; Overview Of Configuring And Installing Conference Stations; Configuring Conference Stations In Cisco Unified Communications Manager - Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual

Chapter 1 An Overview of the Conference Station

Understanding Security Profiles

All conference stations that support Cisco Unified Communications Manager use a security profile
which defines the conference station as nonsecure. For information about the security profile, refer to
Cisco Unified Communications Manager Security Guide, Release 6.0.

Overview of Configuring and Installing Conference Stations

When deploying a new IP telephony system, system administrators and network administrators must
complete several initial configuration tasks to prepare the network for IP telephony service. For
information and a checklist for setting up and configuring a complete Cisco IP telephony network, refer
to the "System Configuration Overview" chapter in Cisco Unified Communications Manager
System Guide.
After you have set up the IP telephony system and configured system-wide features in Cisco Unified
Communications Manager, you can add conference stations to the system.
The following topics provide an overview of procedures for adding conference stations to your network:
•
•

Configuring Conference Stations in Cisco Unified Communications Manager

To add conference stations to the Cisco Unified Communications Manager database, you can use:
•
•
•
•
For more information about these choices, see the
Communications Manager Database" section on page
For general information about configuring conference stations in Cisco Unified Communications
Manager, refer to the "Cisco Unified IP Phones" chapter in Cisco Unified Communications Manager
System Guide.
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Configuring Conference Stations in Cisco Unified Communications Manager, page 1-9
Installing Conference Stations, page 1-12
Auto-registration
Cisco Unified Communications Manager Administration
Bulk Administration Tool (BAT)
BAT and the Tool for Auto-Registered Phones Support (TAPS)
Overview of Configuring and Installing Conference Stations
"Adding Conference Stations to the Cisco Unified
2-7.
1-9